There is nothing like the warmth and glow of pegged plank wood floor. Over time dust dulls their shine and daily wear steals their warmth. If you have ever wondered why your floors does not glow the way they used to then it might be time to rethink how you clean them.  Though wood flooring is a great choice for the floors but they also require proper care.

When you have made big investments then you also need to learn how you can clean the hardwood floors. Keeping hardwood floors clean helps you to protect your investment and make sure your floors last for years.

Floors like natural acacia wood and European oak wood floors need the right steps to stay clean and shiny.

This guide shows six simple steps that will help you clean your floors and protect them. These steps work for all types of hardwood including floors you can choose from at Harper Floors where you can also see many wood flooring samples.

Step 1: Sweep Your Floors Every Day

You should sweep every day to keep your floors clean. Dust and dirt can make scratches on the surface which is not good. You can use a soft broom or a dry mop to pick up the dust. This keeps your floors smooth and clean.

You should also sweep under furniture and near the edges of the room where dust can gather. Floors like European oak floors may have small grooves that trap dust so cleaning often helps.

Step 2: Use the Right Vacuum

The method of cleaning is same for all kid o floors be it pine or bamboo. You can check with the manufacturer for specific instructions related to your floor.

Cleaning hardwood floors with a broom and vacuum is effective for all types of wood. A vacuum can clean places that a broom might miss. Use a vacuum that is made for hardwood floors. It should not have hard brushes that can scratch the wood.

You should vacuum at least once every week. If you have pets or small children then vacuum more often. It is better to vacuum in the same direction as the wood grain. This helps keep the floor looking neat especially for floors like natural acacia wood.

Step 3: Mop With Less Water

You should mop the floor but do not use too much water. Too much water can damage hardwood. Use a mop that is just damp and not wet. If water goes between the boards then the wood can warp or change color.

Certain floor types might need different tools and products to make sure your ae doing them justice and avoiding any damage. Here are some points that you need to keep in mind.

1. Wring the most water out of the mop while mopping.

2. Wipe out any spills, as excess moisture can cause the floors to shrink or crack.

3. Mix a few drops of dish soap or castile soap with warm water in a bucket To make a cleaning solution.

4. You should avoid the use of harsh detergents as they will damage the wood on the floor and dull its finish.

Use a mop that is soft and holds less water. You should also use a cleaner that is safe for wood floors. You can make your own cleaner by mixing warm water with a little mild soap. Some cleaners with citrus or mint smell nice and are safe for wood.

Never use bleach or harsh chemicals on wood floors. These can ruin the surface. If your floor is made of european oak wood floors then always use safe products to protect the grain and color.

Step 4: Fix Scratches Quickly

Sometimes your floor might get scratched. This can happen when you move furniture or from pets or shoes. Small scratches can be fixed without changing the whole board. You can use a pen with the same color as your floor to cover the scratch. You can also use a wax stick for deeper marks.

If the scratch is bigger then you can use fine sandpaper. Rub gently in the same direction as the grain. Then add a bit of wood stain and a thin layer of polish. This helps your floor look smooth again.

Floors like natural acacia wood have bold colors, so it is important to match the repair color to the floor.

Step 5: Keep the Right Room Conditions

Wood changes with the air in the room. If it is too wet then the floor can bend. If it is too dry then the boards can crack. Use a humidifier in dry months. If it is humid then open windows or use a fan.

Put rugs in places where people walk a lot. Use mats near doors and under heavy items. This helps protect the floor from damage. Do not use rugs with rubber on the bottom. They can trap water and leave stains.

If you have floors like European Oak Floors, then keeping the room conditions stable helps keep them in good shape.

Step 6: Add a New Finish When Needed

Even good floors can start to look dull after a while. If this happens then you can add a fresh coat of finish. This is not the same as sanding the floor. It just means adding a new top layer.

Before you do this, clean the floor well and lightly rub it so the new coat sticks. Then use a pad or soft brush to put on the finish in a thin layer.

Recoating works well for many wood flooring samples that have a soft or matte look. It makes the floor look new again and keeps it safe from damage.

Tip: Pick the Best Wood for Your Home

If you have not chosen your floor yet, then think about what you need. Do you want a strong floor for busy rooms or something soft and pretty for quiet spaces?

Natural acacia wood is strong and has a bold pattern, which is good for busy areas. European oak wood floors have a smooth look and warm color. They work well for any room style. You can look at wood flooring samples to see what you like best.

Hardwood floors can stay clean if you care for them the right way. You do not need strong chemicals. You only need to clean them often and use the right tools. If you follow these steps, then your floors will stay beautiful and last a long time.

These steps will help you clean them like a pro and keep them safe if your floors are new or old or if they are European oak floors or something else.